null

36" T-Burner and Pan

$298.00
(No reviews yet) Write a Review
SKU:
HP-36SS-TR
3 foot manual match lit burner & pan in stainless steel

36" Trough Burner
Stainless steel linear burner is ideal for fire tables and custom flame creations
Available in natural gas or propane gas for convenient match lit operation


Dimensions:

  • Pan opening:  36 1/2" L x 5 1/2" W
  • Pan Lip:  1 1/4" 
  • Pan w/ Lip: 39" L x 8" W
  • Pan depth:  2 1/2" 

Technical:

  • 75,000 btu's/hr
  • Premium 304 stainless steel, 1 mm wall thickness
  • Burner holes are drilled and staggered for maximum flame effect 
  • Straight pipe burner designed with gas T in center of pipe. Gas pipe extends thru center of pan
  • 1/2" NPT gas connection
  • Maximum gas pressure requirement:  Natural gas (7" wc, 1/4 psi), Propane gas - 11" water column)
  • LP conversion fitting is designed to reduce sooting and improve flame appearance

Buyers Guide For Natural Gas Burners

  • 10 lbs of lava rock will fill pan
  • 20 lbs of fire glass will fill pan and cover burner and pan support lip

Buyers Guide for Liquid Propane (LP) Gas Burners

  • Do not install more than 1/4" of glass or small lava rock above burner holes.  Do not block burner holes
  • Large lava rock (3" or larger) and gas logs can be used as long as burner holes are not blocked
  • Due to sooting (a residue which occurs from  LP gas burning) we suggest using black glass rather than colored glass
  • When designing and constructing fire feature be sure to provide adequate ventilation
  • 15 lbs of fire glass will fill pan (large black fire glass is recommended)

Warning - For your safety

  • *** Wet lava rock can explode when heated.  Allow fire pit to burn at least 45 minutes or until lava rock is dry before coming within 15 feet of fire during start up.  Consider covering fire pit to keep lava rock dry to prevent this occurrence or use lava rock 3" in diameter or larger.
  • *** LP gas is a heavy gas.  Applying too much media over burner holes may create back pressure and gas leakage resulting in gas pooling in fire pit.  
  • *** A minimum of two ventilation openings 18 sq. in. each and orientated 180 degrees apart must be installed at base of enclosure for LP gas fire pits

All information provided is for general information only.  Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier.  Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2

Additional products available from Flame Creation, LLC

  • Automated burner systems
  • Whistle free flexible gas lines
  • Stainless steel burner pans
  • Gas keys (Lengths: 4", 9", 12", 18", 24")
  • Custom and prefabricated fire pit frames
  • Premium accessories:  Fire glass, gas logs, river stones, lava rock (small, medium and large boulders)

"STRIVING TO BE YOUR FLAME SOURCE HEADQUARTERS"

Prop 65 warning (CA residence)


Trustpilot