58" Electronic Ignition Fire Trough w/ 6" wide deck (3 ft. Linear Burner)

(No reviews yet) Write a Review
58" electronic ignition fire trough with wide decking

Prefabricated fire pit frame with 6" decking
CSA certified 3 ft. electronic ignition burner
Ideal for commercial and residential projects requiring the convenience and safety of an electronic burner system. 

Gas fire pit frame kit includes:

  • Heavy duty frame construction
  • Stainless steel pan
  • Fully assembled electronic ignition gas burner insert
  • Stainless steel flexible gas line for convenient gas connection
  • Available in natural or propane gas

Standard electronic ignition burner system:

  • CSA certified U.S and Canada
  • 36" stainless steel burner (75,000 btu/hr) 
  • Electrical requirement: 120VAC power from source (wall switch, timer or remote) to fire pit location

Commercial electronic ignition burner system (Available in 120VAC or 24VAC):

  • 120VAC burner system includes a gas solenoid valve
    • Electrical requirement: 120VAC from source (wall switch, timer or remote) to solenoid and burner
  • 24VAC burner system includes a gas solenoid valve and power supply (Nema 3R electrical enclosure)
    • Electrical requirement: 120VAC from source to power supply.  Low voltage (24VAC) from power supply to solenoid and burner
  • CSA certified U.S and Canada
  • 36" stainless steel burner (75,000 btu/hr)
  • Emergency shut off switch is recommended.  Refer to installation supplies for purchasing
  • Gas solenoid valve prevents gas from flowing to burner when system is turned off.  

Fire Glass Information:  

  • 40 lbs of fire glass is recommended for natural gas applications
  • 25 lbs of fire glass is recommended for propane gas applications
  • Propane applications:  Apply up to 1/4" of fire glass over burner.  Do not block burner holes with media
  • Burner pilot area and pilot hood must be clear of any media or debris to operate

Buyers Guide:

  • Timer and emergency stop switch sold separately- see our installation supplies
  • Burner must be covered when not in use.  Custom metal and fabric cover available
  • Prefabricated fire pit allows you to be creative finishing the exterior of frame
  • Continue shopping for installation supplies and fire pit accessories to enhance the flame.
  • Flame Creation products include: fire glass, lava rock, river stones, covers, timers, safety shut off switches, vents
  • Electronic burners require outdoor approved wire with conduit from source (breaker and switch) to fire pit location
  • GFCI protected circuit must be utilized
  • Ventilation required


  • Electronic Ignition Control Type
    • On/Off Operation:  Burner system turns on/off with wall switch, remote, timer or home automation (purchased separately)
    • On/Off Operation with Remote: Includes remote and receiver which can be plugged into an approved outlet
    • High/Low Operation with Remote: Includes a smart remote control with Bluetooth technology which adjust flame from high to 45% turndown
  • Gas Key Valve Kit allows for manual flame height adjustment
    • Valve kit includes: brass valve, decorative valve cover, flexible gas line and choice of 3", 8", 12", 18" key.

Frame Dimension: 58" L x 23" W  (min. height: 18")
Pan Dimension: 45 1/2" L x 10 1/2" W

Prop 65 warning (CA residence)