null

12" Gas Fire Ring Kit

$139.00
(No reviews yet) Write a Review
12" stainless steel gas fire ring kit
SKU:
FT-FPS12-A

12" Gas Fire Ring Kit
Ideal for outdoor fire pits, fire bowls, fire tables and custom flame creations
Available in natural gas or propane gas for convenient match lit operation

Gas Fire Ring Kit Includes: Fire ring, valve, 3" key, decorative valve cover, 1/2" gas pipe elbows

Technical
:

  • 90,000 btu's/hr
  • Premium 304 stainless steel, 1 mm wall thickness
  • Tubing is angled in center hub to prevent water from entering gas supply
  • 1/2" FIP located in center hub of ring
  • Maximum gas pressure requirement:  Natural gas (7" wc, 1/4 psi), Propane gas - 11" water column)
  • LP conversion fitting is designed to reduce sooting and improve flame appearance
  • Do not use corrugated gas lines from source to fire feature or you may experience a whistling noise during operation

Options:

  • Whisper flex gas line: provides convenient gas connection
  • Fuel type: Choose between natural or propane gas
  • Key length: Make sure key is larger than the width of your fire pit wall

Buyers Guide For Natural Gas Burners

  • Install approved media up to 2" above burner
  • Gas logs and large lava rock can be installed on top of media

Buyers Guide for Liquid Propane (LP) Gas Burners

  • Install fire ring with holes facing up
  • Do not install more than 1/4" of glass or small lava rock above burner holes.  Do not block burner holes
  • Large lava rock (3" or larger) and gas logs can be used as long as burner holes are not blocked
  • Due to sooting (a residue which occurs from  LP gas burning) we suggest using black glass rather than colored glass
  • When designing and constructing fire feature be sure to provide adequate ventilation

Warning - For your safety

  • * LP gas is a heavy gas.  Applying too much media over burner holes may create back pressure and gas leakage resulting in gas pooling in fire pit.  
  • * A minimum of two ventilation openings 18 sq. in. each and orientated 180 degrees apart must be installed at base of enclosure for LP gas fire pits

All information provided is for general information only.  Designing, installing, and servicing of any gas burner and fire feature must be performed by a qualified professional and gas supplier.  Installations must conform to local codes or in the absence of local codes refer to the National Fuel Gas Code (ANSI Z223.1 or CAN/CGA 8149.1), National Fuel Gas Installation Code, Propane Installation Code or CAN/CGA B149.2

Additional products available from Flame Creation, LLC

  • Automated burner systems
  • Whistle free flexible gas lines
  • Stainless steel burner pans- custom sizes available
  • Gas keys (Lengths: 3", 8", 12", 18", 24")
  • Custom and prefabricated fire pit frames
  • Premium accessories:  Fire glass, gas logs, river stones, lava rock (small, medium and large boulders)

"STRIVING TO BE YOUR FLAME SOURCE HEADQUARTERS"

Prop 65 warning (CA residence)


Trustpilot