48" Curved Fire Pit Pan

(No reviews yet) Write a Review
48" Curved Fire Pit Pan

48" Curved Fire Pit Pan with 36" Curved Burner
Pan can be installed at your preferred depth in fire pit.  Available in natural or propane gas.                                                                               


  • Radius: 47 3/4"
  • 75,000 BTU's
  • 16 gauge stainless steel
  • 6" x 6" access plate provided in center of pan
  • Gas connection located in center of burner (1/2" npt)
  • Hole provided in center of access plate for gas connection

Pan Dimensions:

  • Outside arc: 48"
  • Inside arc: 41"
  • Width: 8"
  • Depth: 2"
  • Arc dimensions can vary +/- 1 inch

Buyers Guide (How to make template of curved pan)
Radius is the length of line from center of circle to the perimeter

  1. Cut a string 47 3/4" in length
  2. Hold one end of string in a fixed position
  3. Tie a pencil to other end of string and draw arc
  4. Measure 41" around arc to determine inside arc of pan
  5. Cut a string 55 3/4" and follow above steps.  Measure 48" around arc to determine outside arc

General Information:  

  • Access plate allows access to inside of fire pit for installing gas lines and servicing propane conversion fitting
  • Continue shopping to purchase whistle free flexible gas line for connecting to access plate

Natural gas information:

  • 35 lbs of fire glass will fill fire pit pan
  • Additional glass may be required to fill to desired height depending on thickness of ledge.  (Natural gas only)

Liquid propane gas information:

  • LP gas air mixer fitting will reduce sooting and produce a more realistic flame appearance
  • LP conversion fitting should be installed on bottom side of access plate per instructions
  • Ventilation must be provided at the base of propane fire pits for safe operation
  • Do not install more than 1/4" of fire glass or small lava rock above burner holes
  • Do not block burner holes with media

* Custom sizes available

Prop 65 warning (CA residence)